A: The short answer is no. Stone is a product of nature and difference in color and vein characteristics are to be expected. Viewing and approving material prior to fabrication is recommended depending on the type and colour.

However, many man-made options, such as Quartz and solid surfaces, such as Corian, do look the same, or close to the same, from one lot to the next.

A: There are a few. In order to maintain the structural integrity of the countertop, we require at least 3” of stone in the front and the back of the sink cutout. In nearly every sink installation, Deal N Roc uses aluminum undermount sink brackets that are attached to the base cabinet.

Additionally, we recommend that if 2cm stone is being used, an overmount sink should be provided. Lastly, Deal N Roc will need to know the sink type prior to scheduling your template and design for the project so we can plan around it.

You will also need to know the measurements of the under-cabinet to ensure that the sink that you’ve selected will fit into the space allotted.

A: Undermount sinks are always recommended for granite countertops. You can pick any sink that can fit the cabinet opening. Granite undermount sinks require extra support.

A: Yes, we offer same-day plumbing with your countertop installation. In fact, we are the only stone countertop installers in the area who are able to offer same-day plumbing installation.

A: No. Many types of granite contain pits and fissures that are natural characteristics of granite. Some granites exhibit these characteristics more than others, and the lighting of the room can make these marks more or less visible. These characteristics should be pointed out to the client prior to deciding on a particular material and pre-approval of the actual slab is recommended.

A: While it is difficult to permanently repair granite, it is also very difficult to damage it. However, if some damage does occur, granite can usually be repaired by a mix of epoxy and ground up chips of granite.

A: Though not necessary, all granites are sealed. The sealer used is a penetrating sealer that does not change the colour of the stone. It penetrates the stone and will help prevent any staining. However, it will not stop the penetration of moisture entirely. When a liquid that might cause staining spills on the granite, it should be cleaned up as soon as possible.

A: One method you can use to check if your granite needs to be resealed is to sprinkle some water on your countertops. If the water soaks into the stone and does not bead up, then we would recommend resealing your granite. Prevention is always better than a cure; reseal your countertops every year to prevent staining.

A: Granite is a very dense material and under normal conditions it is chip and scratch resistant. However, pots and pans and other heavy objects may chip the square edge around the sink area. Several other edge profiles are available that will look beautiful and reduce the chances of chipping.

A: Generally speaking, no. Because granite is very dense and not very porous, its ability to absorb liquids that cause stains is highly reduced. Granite is approximately 95-98% stain resistant, and is virtually maintenance-free. This is why it is the stone material of choice for outdoor projects such as patios, courtyards, driveways, footpaths, and steps. If by chance there is a stain, it can usually be removed using a poultice or paste that will draw out the oil from the stone.

A: Absolutely! High-end granite maycost a little more than other materials, but when you take into accounthow long-lasting it is; it’s a smartchoice.

A: Yes, granite is ideal for kitchens because under normal conditions it will not burn. Granite will not be harmed by hot pots, pans, or open flames.

A: Yes, granite is an extremely tough, durable material and in most cases can be used as a cutting surface without fear of scratching the stone (although knives may dull the surface by repeated cutting on the stone).

A: The samples seen on the Deal N Roc site have been scanned as digital images. While these are high quality resolutions, they will never capture the exact nature of the real thing. Although one of our strengths is the consistency of our products, you should expect some variation as it is natural stone. These slight variations in colour, pattern, and granularity give granite its unique nature, coveted by discriminating consumers around the world.

A: Granite is one of the longest lasting and toughest natural stones on the market, making it the perfect choice for any outdoor or indoor project. In 1822, an Austrian mineralogist named Friedrich Moh created a measurement of relative hardness based in a stone’s ability to withstand scratches. Because granite is composed of mainly feldspar and quartz, it has an exceptional resistance to scratches, which is why it is chosen for high traffic areas and has been considered one of the best building materials for thousands of years.

A: Granite is igneous rock, which provides a clue to its origins. “Igneous” comes from the Latin “igneus” meaning “fire” (also the root word “ignite”) and indicates that it was formed by liquid, fiery magma and melted just like volcanic lava. In fact, its chemical composition is similar to that of lava. However, unlike lava, the molten rock never reached the surface. It solidified deep inside the earth, where it slowly cooled and crystallized. The granite that comes from the Canadian Shield is estimated to be approximately 3.8 billion years old. Splits and rifts caused by the earth’s plates shifting (due to seismic activity) forced the granite to the surface in the Precambrian Age, more than 570 million years ago. Luckily for us, the Canadian Shield is known around the world for producing some of the most beautiful, durable granite in the world.

A: Quartz countertops are just as strong as granite, if not more so in many cases. Quartz is non-porous and does not require sealing. Quartz countertops are virtually no-maintenance, and are a great alternative to marble with many colours available that mimic the look of marble stones like calacatta and carrara, without the worry of staining and scratching.

A: Natural quartz is a white or colorless mineral consisting of silicon dioxide, found widely in igneous, metamorphic, and sedimentary rocks. Quartz countertop slabsare made of crushed quartz mixed with resin. They are manufactured in a variety of different patterns and colors.

A: Just like engineered quartz, Solid Surface Countertops areman-made. They are usually made up of a combination of marble dust, bauxite, acrylic, epoxy or polyester resins and pigments. The main benefit of solid surface countertops is that you can get a near-seamless installation, unlikegranite and quartz, and other natural stones. You have probably heard of Corian; it was the first solid surface countertop available on the market.

A: We do not recommend using marble for kitchen countertops. Marble is not recommended for use in the kitchen because of its tendency to stain and scratch. Natural marble is also very susceptible to acidic substances, like lemon juice and vinegar, and oil. If you love the look of Marble, but actually want to cook in your kitchen, there are many man-made Porcelain countertops and Granite Countertops available that look just like the real thing. Natural marble, because of its beauty and timeless look, is an excellent choice for vanities, wet bars, and fireplaces.

A: Granite is the hardest and densest of all the natural stones and quartz and solid surface (Corian) are also extremely hard, as well as scratch and stain resistant. Since these products are highly durable and scratch resistant, they are the first choice for kitchen countertops. Bakers favour stone countertops over other types because it’s the best surface for rolling out and manipulating dough.

A: Stone, both natural and man-made, is timeless and highly coveted. It lends strength to its surroundings by evoking a classic and unique feeling. It invites luxury into your home while still being affordable. In the future, if you sell your home, it will add to your property value.

A: Deal N Roc offer a wide variety of products. Some are in stock and others are created to your specifications. However, because of our commitment to customer service, as well as our cutting-edge technology, skilled craftsmen and modern manufacturing facilities, Deal N Roc has one of the best turnaround times in the industry.

A: Yes. When you come into our Location, we give you a packet that includes several local suppliers of granite slabs. You can go and tag your own granite slab, or you can select your granite from our extensive showroom samples.

A: The Deal N Roc team has the experience you can depend on, with four generations of granite craftsmanship that dates back to 1996. Our company has been serving Southern Ontario since 2002, and has earned a reputation for high quality natural stonework. Moreover, all of our sales and support staff are dedicated to customer satisfaction, and are happy to help you with your order from start to finish.